CROZIER SPEED LATHE - Model 28DC1 HP Belt Drive, 0-3600 RPM, Variable SpeedBased on the Crozier Model 30DC, our most popular model, armed with a manual collet closure, the 28DC is an extremely cost-effective choice for small polishing and deburring jobs.
Description:Manual Collet Closure Variable Drive motor: The DC variable speed motor provides spindle speeds from 0 to 3600 RPM. This wide range allows the operator to find the optimum speed for each operation. There is no need to move the belt to change the speed. The motor is rated at 1 horsepower, sufficient for demanding jobs. The motor transfer is through a multi-groove belt, similar to the belt under the hood of your car. Dynamic spindle braking is provided through the control. There is nothing mechanical in the braking mechanism to wear, replace or adjust. Spindle: The oversized spindle rides on ball bearings. The machine can operate continuously at 3600 RPM. The front bearing, on the collet end, is a double row assembly with an extremely high load capability. The bearings are permanently lubricated. The spindle has a through hole up to the capacity of a standard 5C collet. The collet insert can be replaced without replacing the entire spindle. Power: The Speed Lathe requires 120 Volts, single-phase power. The input power is AC that is converted to DC. By design, the DC motor only draws power as required for the operation. Specifications:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
