1 HP Belt Drive, 1800 RPM, Single Speed, Electric Brake
The Crozier Model 3CPL Speed Lathe is a chuck model designed to handle the odd jobs that do not fit in a collet or for small batch jobs.
Standard Features
- 1 HP Belt Drive
- 6 inch manual chuck
- 1800 RPM, Single Speed
- Electric Brake
- Cast Housing
- 5C Collets
- 3 Phase / 240 Volts
Price: $3,850
|
|
The unit is small enough to fit on a table. The chuck is a standard six inch design. The jaws are
two piece for doing both ID and OD work. The oversized spindle runs on a double row bearings on the
end with the chuck. Power is provided by a 1 HP, 3 phase motor. The spindle is stopped by a
electric brake on the back of the motor.
Collet |
| Chuck Type | 3 Jaw |
| Chuck Capacity | 6 inches |
| Chuck Operation | Manual |
Spindle |
| Housing Construction | Cast |
| Bearing Type | Ball |
| Front Bearing | Double Row |
| Rear Bearing | Single Row |
| Rear Lubrication | Sealed |
| Standard Spindle Speed | 1800 RPM |
| Maximum Spindle Speed | 2400 RPM |
| Spindle through Hole | 1.125 inches |
| Spindle Brake | Electric |
Drive System |
| Motion | Multi-groove V Belt |
| Motor Speed | 1800 RPM |
| Motor Horsepower |
1 HP |
| Motor Phase | Three |
General Notes |
| Electrical | Three Phase/240 Volts/5 Amps |
| Base Width | 20 inches |
| Base Depth | 18 inches |
| Machine Height | 16 inches |
| Machine Weight | 140 lbs. |
| Shipping Weight | 160 lbs. |
